SSC JE Exam Analysis 2023: Check Detailed SSC JE Tier 2 Exam Analysis

SSC JE Exam Analysis 2023: The Staff Selection Commission has successfully conducted the SSC JE Tier 2 Exam on 04 December 2023. The examination for 1324 vacancies of Junior Engineer was scheduled to be held from 09:00 am to 11:00 am. Candidates who participated in the SSC JE Exam can read the following article to check the detailed SSC JE Exam Analysis 2023 presented by the esteemed experts of ADDA247. Check the difficulty level and section-wise SSC Junior Engineer Exam Analysis 2023 below.

SSC JE Exam Analysis 2023

SSC conducted the SSC JE Tier 2 examinations on 04 December 2023 to shortlist candidates for the Junior Engineer (Civil, Mechanical and Electrical) post. This phase of the SSC JE exam is specifically for candidates who successfully cleared the preceding stage. If you are also the one who participated in the examination held for the posts released under SSC JE Notification 2023  then referring to the analysis here can assist you in evaluating your performance. Gain valuable insights into your exam outcomes and identify areas for improvement.

SSC JE Exam Analysis Today Difficulty Level

As per the feedback of the applicants, the overall difficulty level of the SSC JE Exam held on 04 December 2023 was easy. However, it is crucial to note that the difficulty level of the examination varies from candidate to candidate based on the level of their preparation.

SSC Junior Engineer Exam Analysis

The SSC JE Tier 2 Exam comprises 100 questions, with a total weightage of 300 marks. The table below comprises the number of questions asked from each topic, providing valuable insights for candidates.

SSC JE (Civil) Exam Analysis 2023: Questions Asked

1. What is the formula for calculating the moment of inertia of a circle?
2. On which river is the Hirakud Dam located?
3. Coefficient of uniformity>6, 1<Cc<3. which type of sand?
4. A diagram Based problem (apparatus of UCS was given)
5. Slenderness ratio of the tension member
6. Dicken’s formula
7. Precipitation form
8.  Match the following based on the acceptable and permissible values of Calcium, Chloride, residual Cl2, and Fluoride.
9. Questions Based On Air pollutants and diseases
10. R versine Pi/2
11. Max permissible deflection of the beam after the erection of partition wall, floor finishing
12. Which constant relates between steel and concrete – young modulus, shear modulus, modular ratio, Poisson ratio
13. Transition curve-based statement
14. zero air void line is under which curve
15. Question Based On Shrinkage limit
16. Rainfall data and Φ index are given, then find runoff.
17. Irrigation (canals related question)
18. Question Related To Contour Canal
19. Duty-based numerical problem

SSC JE (Mechanical) Exam Analysis 2023: Questions Asked

1. Condition of winter
2. Efficiency of Diesel cycle
3. Longitudinal stress
4. Definition of surface tension
5. PV- Diagram: Saturation liquid line and saturated vapor line meet at?
6. Radial curved blade, forward curved blade, backward curved blade: match the following with the diagram.
7. Boiler Mounting
8. If Specific gravity=0.8 then Specific weight=?
9. COP of VARS
10. Reynold’s Number
11. In winter, Rankine cycle is high or low?
12. The isochoric process is also known as?
13. Kelvin Plank statement
14. Flywheel is starting from a rest position, wo=0, k=1 m, m=3000 kg, T=3000 N-m, Fluctuation of Energy=?
15. For force acting in the same direction, find the net resultant.
16. Elongation-based numerical (Given A=5000 mm2, E=200 Gpa, δtotal=?)
17. For the cantilever beam, UDL, find γB.
18. For thin cylinder, P=150 N/mm2, L=1.5 m, D=50 mm, σL=?

SSC JE (Electrical) Exam Analysis 2023: Questions Asked

• Characteristics of the radial system
• Rarely used dielectric in cable
• Which turbine is used in the long head at the low discharge of water?
• Numerical on economic generation
• Which terminal is highly doped in BJT?
• Numerical on MOSFET
• In the transformer reading of the wattmeter
• Value of γ for common collector configuration.
• Candela per meter is the unit of which quantity?
• Infrared heating emits which radiation?
• L1=24 mH, L2=6 mH, find maximum mutual inductance
•  Nuclear power plant
• Millman’s theorem
• Work of nuclear in control grid
• Split phase motor
• Resonant circuit
• Series Resonance
• Starting torque of split phase motor
• Magnetic susceptibility of ferromagnetic material
• The quality factor of Resonant circuit
• Current in Parallel Resonant circuit
• In a Two-value capacitor motor (two capacitors are in series or parallel)?
• Overexcited synchronous motor application
• The alternator is at zero PF, then the armature reaction?
• Condition for maximum efficiency
• Auto Transformer
• The direction of rotation of DC motor (which law is applied?)
• The armature diverter control method
• N vs Ia relation in D.C. series motor
• Synchronous speed (Ns=120f/P)

SSC JE Tier 2 Exam Pattern 2023

• SSC JE Tier 2 exam is a Computer Based Examination with Objective Type Questions. The time duration of the exam is 2 hours, and there is a negative marking of 1 mark for each incorrect answer.
• The exam structure is as follows:

SSC JE Salary 2023-Click To Check

SSC JE Exam Analysis 2023, Read in Hindi