Access to All SSC Exams Courses Buy Now
Home RRB JE Stage-II RRB JE Stage II : Electronics Engineering Quiz | 17th August 2019

RRB JE Stage II : Electronics Engineering Quiz | 17th August 2019

Dear aspirants,

RRB JE Stage II exam is scheduled to be conducted from 28th August to 1st September2019. The overall merit for the selection will be made on the basis of the marks scored in stage II, so candidates need to prepare thoroughly for the second stage. To help the aspirants, Adda247 has come up with a study plan in which we will provide you daily quizzes of all technical subjects. The below quiz will be helpful for the candidates who opted Electronics as the exam group in RRB JE stage II. 

About Course:

"Did you Know? In this pack you will get All new content we launch in the next 1 months"

This is the most recommended and NRA-CET ready Pack!
Use Code 'DREAM' to avail at best price today

2000 Students are visiting this Product daily! Hurry now! Seats are Filling fast


About SSC Maha Pack
If you are preparing for more than 1 SSC exams then this is the pack we recommend you buy.

It is most cost-effective and you get access to 100% digital content for all SSC exams on Adda247.SSC Exams Covered in this Pack


SSC Maha Pack Highlights 

  • Structured course content
  • Recorded classes available if you miss any live class
  • Previous Years’ Papers of all upcoming exams.
  • Full Length Mocks based on the latest pattern with detailed solutions (video solutions for certain topics)
  • Topic level knowledge tests
  • Strategy sessions, time management & Preparation tips from the experts
  • Language: English & Hindi Medium


Validity: 1 Month

SSC Maha Pack
  1. Unlimited Live Classes & Recorded Video Courses
  2. Unlimited Tests and eBooks
  3. 1 Lakh+ Selections
  1. 15 Months
  2. 27 Months
  3. 9 Months
  4. 3 Months
  5. 1 Month
3999 266/month

Q1. Which is correct with respect to the size of the data types?
(a) char > int > float
(b) int > char > float
(c) char < int < double
(d) double > char > int

S1. Ans.(c)
Sol. char has less bytes than int and int has less bytes than double in any system.

Q2. Find the voltage Vx in the given[/expand] circuit.

(a) 10
(b) 20
(c) 30
(d) 40

S2. Ans.(a)
Sol. From the circuit applying Kirchhoff’s voltage law,
we can write 50= 15+ 10+ 15+Vx => Vx= 10V.

Q3. For maximum transfer of power, internal resistance of the source should be
(a) equal to load resistance
(b) less than the load resistance
(c) greater than the load resistance
(d) none of the above

S3. Ans.(a)
Sol. Maximum power transfer theorem states that, to obtain maximum external power from a source with a finite internal resistance, the resistance of the load must equal the resistance of the source as viewed from its output terminals.

(a) 20 Hz
(b) 30 Hz
(c) 40 Hz
(d) 50Hz

Q6. ………..increases the steady state accuracy
(a) Integrator
(b) Differentiator
(c) Phase lead compensator
(d) Phase lag compensator

S6. Ans.(a)
Sol. Integrator increases the steady state accuracy.

Q7. The transient response, with feed-back system
(a) rises slowly
(b) rises quickly
(c) decays slowly
(d) decays quickly

S7. Ans.(d)
Although it is not necessary that transient response decreases everyone a feedback is applied, for eg. take the case of positive feedback or any BIBO unstable system in negative feedback where the feedback does increases oscillations and instability. So, supposing you are talking about a BIBO stable negative feedback, the feedback produces an actuating signal that is the difference of input and feedback processed output which introduces a damping in the system, so this damping is the reason transient response decreases.

Q8. In a vacuum tube diode current flow is due to
(a) electrons only
(b) holes only
(c) positive ions only
(d) none of the above

S8. Ans.(a)
Sol. By removing the air from the tube to create a vacuum, the electrons have a clear path from the anode to the cathode, and a current is created. When the cathode is heated, and a positive voltage is applied to the anode, electrons can flow from the cathode to the anode.

(a) 2.455 mho/m
(b) 1.765 mho/m
(c) 1.865 mho/m
(d) None of the above

Q10. LCD display represents
(a) Light decoding device
(b) Liquid crystal display
(c) Lead cascade demonstrator
(d) Linear digital demonstrator

S10. Ans.(b)
Sol. Full form of LCD is Liquid crystal display.

Get 40% Discount on RRB JE Stage II on Test series, Live batches, Video Courses & ebooks

Register for RRB JE CBT Stage II Free Study Material

You may also like to read:



Please enter your comment!
Please enter your name here



Sign Up
Forgot Password
Enter the email address associated with your account, and we'll email you an OTP to verify it's you.

Reset Password
Please enter the OTP sent to