FCI Manager Phase 2 Syllabus 2020: Check Subject Wise Detailed Syllabus

FCI Manager Phase 2 exam will be held on 23rd February 2020. Check detailed post wise syllabus for FCI Manager Phase 2 exam. Read below to know more.

FCI Manager Phase 2 Syllabus 2020: FCI Manager Phase 2 exam is scheduled on 23rd February 2020 for candidates selected in Phase 1. Before appearing for the exam, one must get acquainted with the syllabus for all posts. This article will provide you with all the information regarding the FCI Manager Syllabus for Phase 2 that needs to be prepared for the FCI Manager Phase 2 exam 2020.

Food Corporation of India (FCI) released 330 Vacancies of FCI Managers where candidates from various fields were required to appear for the FCI manager exam. The recruitment comes as a good opportunity with a high pay scale and esteemed post. Have a look at the post wise FCI Manager Phase 2 syllabus and start preparing for the exam.

Click here to Get online test series for FCI Manager Phase 2 Exam

FCI Manager Phase 2 Syllabus 2020

Take a look at the Papers to be written by various posts according to their post-code:

Number of Papers Post Code Post Note
One Paper Exam Paper I
Only
A Manager (General)
B Manager (Depot)
C Manager (Movement)
Two Paper Exam Paper I
and
Paper-II
D Manager (Accounts) Candidates applying
for any ONE of the
post code D, E, F
and G will appear in
Paper-I to be followed by Paper-II.
ONLINE TEST for
Paper – I & Paper – II
shall be held in a single sitting.
E Manager (Technical)
F Manager (Civil Engineering)
G Manager (Electrical
Mechanical Engineering)
Paper III
and
Paper IV
H Manager (Hindi) Candidates applying
for Post code H will
appear in Paper-III
to be followed by
Paper-IV.
ONLINE TEST for
Paper – III & Paper-IV
shall be held in single
sitting.
  • Only Paper I for posts- Manager (General), Manager (Depot) and Manager (Movement)
  • Paper I + Paper II for posts- Manager (Accounts), Manager (Technical), Manager (Civil Engineering), Manager (Electrical Mechanical Engineering)
  • Paper III + Paper IV for Post- Manager (Hindi)

FCI Manager Phase 2 Syllabus 2020: Paper-1 (Duration – 90 minutes) (120 Marks)

  • 120 Multiple Choice Questions will be asked
  • 30 questions each from Reasoning, Data Analysis, Computer Awareness, and General Awareness, Management, & Current Affairs will be asked.
  • The syllabus will be similar to banking exams and candidates need to prepare accordingly.

Click here to Get online test series for FCI Manager Phase 2 Exam

FCI Manager Phase 2 Syllabus 2020: Paper-2 (Duration – 60 minutes) (120 Marks)

I. Manager (Accounts) (Post Code-D):

Paper 2 for Manager(Accounts) will comprise of 60 Multiple Choice Questions on General Accounting and Finance. The syllabus for the same is given below:

  1. Basic Accounting concept including preparation of books of accounts and Accounting Standards.
  2. Financial Management:
    (a) Analysis of Financial statement
    (b) Budgeting & Budgetary control
    (c) Working Capital management
    (d) Capital Budgeting & Ratio Analysis.
  3. Taxation:
    (a) Income Tax including the filing of a return, TDS, Advance Tax, etc.
    (b) Goods & Services Tax.
  4. Auditing:
    (a) Auditing Concepts and Methods
    (b) Internal & External Audit of Companies.
  5.  Commercial Laws:
    (a) Contract Act (b) Companies Act (c) Sales of Goods Act (d) Negotiable Instrument Act (e) Consumer Protection Act (f) RTI Act.
  6. Basic of Computers:
    (a) Operating System (b) Browsers (c) Email (d) Memory (Internal, External, portable) (e) Chats (f) Office (Word, PowerPoint, Excel) (g) Networks.

II. Manager (Technical) (Post Code-E)

Paper 2 for the post of Manager(Technical) comprise of  60 Multiple Choice Questions on Agriculture, Food Science and Technology, Agricultural Engineering & Bio-Technology

1. Agricultural- Statistics of Indian Agriculture (Cereals & Pulses), Food & Agriculture Microbiology, Nutrition (Animal & Plant), Postharvest care of Cereals & Pulses, Foodgrain Protection, Agriculture Extension.
2. Biotechnology- Microbes: Beneficial & Harmful, Genetic Engineering, Biotechnological Principles, Economic Biotechnology, Pathogens & Control, Recent trends.
3. Entomology section will comprise of topics- Basic Entomology, Economic Entomology, Beneficial & harmful insects, integrated Post Management (IPM), Storage Grain Insect pest, and Vertebrate Pests.
4. Chemistry- Physical Chemistry: Structure of Atoms, Chemical Bonding, Radioactivity; Inorganic Chemistry, Periodic Table, Basics Metals & Non-metals, Organic Chemistry, Basics of alkanes, alkenes, alkynes, alcohols, aldehydes and acids, Biochemistry (Carbohydrates, Proteins & Fats).
5. PFA Act, 1964, Food Safety and Standards Act, 2006/Food Safety and Standards Regulations 2011, Right to Information Act, 2005.

Click here to Get online test series for FCI Manager Phase 2 Exam

III. Manager (Civil Engineering) (Post Code-F)

1. Engineering Materials & Construction Technology: Topics include- Selection of a site for the construction, Planning, and orientation of buildings, Brick’s timber, Lime, Cement Mortar, Plain and reinforced Cement Concrete, Bitumen, Asphalt,  Ventilation, and air conditioning, acoustics. Building and highway materials, Stones.
2. Building Materials: Stone, Lime, Glass, Plastics, Ceramics, Aluminium, Fly Ash, Basic Admixtures, Steel, FRP,  Timber, Bricks and Aggregates Classification, properties and selection criteria, Cement, etc.
3. Construction Practice, Planning, and Management: Construction Planning, Equipment, site investigation, Tendering Process, Quality Control, Productivity, Operation Cost; Land acquisition, Labor safety, and welfare and Contract Management.
4. Surveying: Surveying, Leveling, temporary and permanent adjustments of levels and
Theodolite, Trigonometrically and Triangulation survey. Contours and contouring, Computations of areas and volumes, Use of theodolite, tachometry.
5. Soil/Geotechnical Engineering: Classification of soil, Field identification tests, water content, specific gravity, voids ratio, porosity, Local and general shear failures, design Criteria for shallow foundation, Plate load test, Stability of simple slopes. Soil permeability and its determination in the laboratory and field, Darcy’s law, Flow nets its Characteristics.
6. Highway and bridges: Classification of road land width, Flexible pavements, WBM courses, sub-base, crushed cement concrete base / sub-base course. Prime and tack coats, surface dressing, Asphaltic concrete, seal coats, sand bitumen base curse,  etc.
7. Structural Analysis: Strength of materials, Bending moments and shear force, Analysis of determinate and indeterminate structure, Suspended Cables, Concepts and use of Computer-Aided Design.
8. Design of steel structures: Principles of working stress methods, Design of tension and compression members, Design of beams and beam-column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.
9. Design of Concrete and Masonry Structures: Limit state design for bending, shear, axial compression, and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases.
10. Estimating, Costing and Valuation: estimate, analysis of rates, earthwork, Brick, RCC work shuttering, Painting, Flooring, Plastering flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles, etc. Valuation- Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

IV. Manager (Electrical Mechanical Engineering) (Post Code-G)

  • Thermodynamics, Heat Transfer,
  • Refrigeration and Air-conditioning,
  • Theory of Machines, Machine Design,
  • Strength of Materials, Engineering Materials,
  • Production Engineering, Industrial Engineering,
  • Production Planning and Control Material handling,
  • Electrical Circuits, Network theorems, EM Theory, Electrostatics,
  • Material Science (Electric Materials), Electrical Measurements,
  • Elements of Computation
  • Power Apparatus and Systems (Power System: Power generation; Thermal, Hydro, Nuclear & Solar power production, and Transmissions),
  • Electromechanics, Control Systems, Electronics and Communications, Estimation and costing,
  • Use of computers.

FCI Manager Syllabus 2019: Paper-III & Paper IV

Candidates applying for the post of Manager (Hindi) will be required to appear for both Paper III and Paper IV. The merit of online tests will be on the basis of combined marks secured by the candidates in both Paper – III and Paper- IV.

Paper-III (Duration-90 minutes) (120 Marks)

In this, candidates will get 120 Multiple Choice Questions on subjects namely General Hindi, General English, General Awareness, General Intelligence, Computer Awareness, Management, and Current Affairs.

Paper-IV (120 Marks) (Subjective Test)

Duration of 90 minutes and this paper will be subjective in nature.

i. 01 Passage will be given for translation from Hindi to English (30 Marks)
ii. 01 Passage will be provided for translation from English to Hindi (30 Marks)
iii. 01 essay to be written in Hindi (30 Marks)
iv. 01 Precis Writing to be written in English (30 Marks).

For Paper-IV Manager (Hindi), a candidate should know how to use the following keyboard layouts:
1. Inscript
2. Remington (GAIL)

FCI Manager Syllabus 2020: Phase 1

Below is the summarized FCI Manager syllabus of FCI Manager Recruitment 2019 exam for Phase I:

English Language Reasoning Ability Numerical Aptitude
  • Reading Comprehension
  • Cloze Test
  • Fillers
  • Sentence Errors
  • Vocabulary based questions
  • Sentence Improvement
  • Jumbled Paragraph/Sentences
  • Paragraph Fillers
  • Paragraph Conclusion
  • Paragraph/Sentences Restatement
  • Puzzles
  • Seating Arrangements
  • Direction Sense
  • Blood Relation
  • Syllogism
  • Order and Ranking
  • Coding-Decoding
  • Machine Input-Output
  • Inequalities
  • Alpha-Numeric-Symbol Series
  • Data Sufficiency
  • Logical Reasoning:
  • Passage Inference,
  • Statement and Assumption,
  • Conclusion etc
  • Data Interpretation
  • Inequalities (Quadratic Equations)
  • Number Series
  • Approximation and Simplification
  • Data Sufficiency
  • Miscellaneous Arithmetic Problems:
  • HCF and LCM,
  • Profit and Loss,
  • SI & CI,
  • Problem on Ages,
  • Work and Time,
  • Speed Distance and Time,
  • Probability,
  • Mensuration,
  • Permutation and Combination,
  • Average,
  • Ratio and Proportion,
  • Partnership,
  • Problems on Boats and Stream,
  • Problems on Trains,
  • Mixture and Allegation,
  • Pipes and Cisterns

Click here to Get online test series for FCI Manager Phase 2 Exam

Click here to check FCI Manager Official Recruitment Notification